Make your home safe from snow and snowing

_MG_3534_02Since golf sport is one of the most popular nowdays sports in the world, there is a lot of golf players and every one of them desires available golf court all over the year. When weather conditions are bad, which means that there is rain and snow, or mud and dirt all over the court, the whole party needs to move inside. Inside golf club. During the winter, or that bad weather conditions, indoor golf playing can be performed in hotels, welness centers, sports and recreation centers. Before you equip your space provided for making an indoor golf court with expensive game simulators and equipment, make sure that the space, the building itself is well prepared to safely keep your expensive toys out of the outside weather influences, which can not just ruin your party, but even destroy or damage the expensive equipment. So, the best thing to do before making conditions for the space for interior golf court, the best to do is detailed check out and score all technical caracteristics of the building.

many-feet-of-snow-removal-by-Simonds

The best indicator for state of the building is the condition of the roof on the object, according to experts from roofing in Miami, Florida. The roof should be strong enough to hold out maximum snow precipitation which can appear in the district where the object is located. All the time of cold and constant snow season, there can be some snow held up on the roof. Snow is the biggest enemy of every roof, so you need to pay more attention on protecting the building from this white upper influences. Significant snow layer can be melted down, and the falling snow can make additionaly weighted, Next problem that can appear is ice, that rises on the upper side of snow layer, can be 10-20 cm thick. To stop all of these, and to ensure good conditions in your interior golf club, you need to set up antisnow tiles or metal snow stoppers, which can be installed on old tiles on the roof, without so much trouble. Antisnow system is functioning as cutter for snow mass, so those fall down on earth in small pieces instead of avalanche, such it used to be. Snow avalanche falling from hip roof of a building can be very dangerous for everyone walking by, even for those inside golf club, because whole construction can fall for influence of hard pressure on side walls of the building when a lot of snow falls down permanently on the same spot. snow03-3-metal2Set up of snow stoppers on the roof is cheap method of solving the problem, but it is not fo sure the way to handle with snow on the roof in areas of large amount of snow yearly, so you should consider some other more efficient way, and first of all, if possible, long time solution for this problem. One of this solutions is to make additioanl system for breaking the snow that falls from the roof into small pieces, is to set up the metal net ( grid) under the slope of the roof, so the combination with snow stoppers installed on the roof itself it will ensure that no one will be harmed even if the snow falls on his head.

How to find where your roof leaks ?

Finding the exact places where the roof is leaking is a difficult task. Without X-ray vision and a clear path, the job of finding a place where the roof is leaking you can make a headache. Good access to water is speeding up the lists of features and eliminate each of them until you solve the mystery. Something like a detective game. Understanding how water behaves to help you navigate through the tracks more quickly and efficiently.

ce11-29353_958x340

Behavior of water

Water is known to run wherever they want, under special circumstances, and even at that defies gravity. With these capabilities, water may enter through the roof of the house and move quite long distances in bizarre directions before leakage occurs.

The roof can be composed of multiple layers, including tile or metal roofs, metal works, vapor barrier, as well as paper, sound insulation, thermal insulation, plywood, plaster board and so on. Once water enters through the top layer of the roof, you will have to pass over a distance before it finds a weak spot in the next layer, through which they can pass. The fundamental building blocks roof layers can lead to leakage which is very difficult to trace.

670px-Repair-a-Leaking-Roof-Step-2One behavior that takes advantage of a good project and built the roof is leaking water or capillary water. In the same way that light attracts oil in the wick, water can be drawn up if there is a thin air space between the roof material. For this reason, when looking for the source of the leak of water, keep in mind that it may actually be below the level of the leak.

However, more often the wind sometimes pushes water uphill. If blowing just the right angle, a strong wind storm can insert a large amount of water in the open roof and below the line of tiles.

Capillary action of water caused by wind and rain are some of the phenomena that should be kept in mind during the inspection of the building, especially if a leak occurs under very mysterious circumstance

Does Water Leak When the Rains?

If the answer to this question is “yes”, roof leak may not be guilty of leakage at all.

If there are fire sprinklers (sprinklers), water and sewerage system, it should be checked for proper connections and look for damage.

leaking_roof_resizedAny air ducts in the wider area of the leak should be investigated, too. Roof ventilation may suffer a small stroke or be improperly sealed, which weakens the integrity of the roof system and can be a point of entry of water. Rainwater will begin to be collected in the wrong place in the vent, until you collect a sufficient amount of water that will collapse ventilation and allow water to the building.

How Much Time it Takes for Water Begins to Leak From the Start of the Rain?

If the water required a short period of time to appear on the site of the leak, within an hour of the onset of rain, the source of the leak is probably near its exit site. A longer period shows that the water had to go a long way before it finally appeared. Its path can be either a dense maze of nearby spring or path is on the other side of the roof. If happens you are in Texas and need help – don’t hesitate to look for roofing of Irving, Texas.

Improve your home with a metal roof

The cold metal roofs provide long-term energy and lasting benefits for the building.

In today’s tough economic climate, making the roofing material you use may depend largely on the sustainable attributes of materials, such as energy efficiency, as well as the appearance and price. Some people improve only their basements, with the help of   basement remodeling in St. Louis, but at the same time forget how important is to improve their roofs because the roofs can have a significant impact on energy use in buildings, choice of materials is an important decision. Increasingly, architects, civil engineers and investors opt for cool roofing materials that are looking for ways to increase their investment, with the aim of fulfilling their demands for durability, energy efficiency and economy.

metal-roofing

The benefits of energy efficiency of cool roofs are determined primarily by two properties: the total solar reflectance and infrared emission. Cold metal roofing products include non-ferrous metals, non-ferrous metals and chunky-coated metals for use on steep slopes and less steep slope. They are part of the interdependent system of external roofs, foundation, configuration, ventilation and insulation.

As for durability, metal roofs are resistant to wind, fire, hail, snow and are less susceptible to hot-cold, wet-dry cycles that can destroy other materials. Metal roofs are inherently non-flammable, reducing the spread of fire within and across buildings. They are made of inert, safe materials which do not pose a health risk. Commercial metal roofs are in operation for 30 years or more, and the warranty on them is up to 30 years.


 

Energy Efficiency

solar-imageA key factor in the choice of a cold roof, is the energy efficiency of products. In 2004 ORNL – US Department of Energy’s Oak Ridge National Laboratory has completed a three-year comparative study on the energy efficiency and service life of the system of metal roofs. The study compared the various metal roofing materials placed next to each other on the slopes of a steep and less steep slope, including painted galvanized steel, painted and unpainted Galvalume (aluminum zinc) coated steels and non-ferrous alloy roofing materials. These materials have been tested at ORNL in Oak Ridge, Tennessee, and at the test site in Florida, Nova Scotia, and Pennsylvania. Additional test data from exposure of 10, 15 and 30 years were also evaluated.

The evaluation included a comparison of solar reflection and information on the broadcasting of material. Reflected solar energy allows the roof surface to remain cooler, taking into account that less heat is transferred into the building. Ferrous metal roofs and metal roofs painted with glossy coating, reflecting the largest part of solar radiation that hits the roof, keeping the building cooler.

 

Infrared radiation roof is a measure of the absorbed solar radiation that is re-emitted from the roof surface to the sky. Emissivity metal roof varies with the surface; painted or granular-coated metal roof can have infrared radiation up to 90 percent.


type3

Choosing the Right Roof for your Climate

In climates where cooling facilities through the necessary energy consumption is dominated by the same, highly reflective and highly emitting colored or chunky coated metal roof – it can actually re-emit up to 90 percent of the absorbed solar radiation. In areas where the annual consumption of electricity burdened heating, unpainted metal roofs can be more desirable because of its low infrared emissivity, which allows more solar energy to penetrate the building envelope winter. Emissivity painted or granular coated metal roof can be as high as 90 percent.

Tips for Remodeling your Bathroom

Bathroom remodeling is not an easy task at all. There are so many small details, minor things, processes which you have to keep in mind. If you are doing it for the first time, it is easy to get confused. Hence, while remodeling your bathroom make sure to consider the following tips.

Bathroom Remodeling

1. PLAN FOR SHOWER STORAGE: Make sure that you have a proper space to keep all the shower ingredients like shampoo, soap, and razor. But don’t go for the plastic units that hang from the wall. They look very unattractive and will ruin the design of your new bathroom. Instead, try the ceramic tile shelving which is installed in the corner of your shower. It looks good and you don’t have to worry about knocking the shampoo bottles down with your elbow.

2. USE ACCENT TILES: Mosaic or glass tiles might be slightly expensive, but you don’t need many pieces of it. A dozen sheets are enough to make an impact. Using them as a border adds to the beauty of your bathroom and looks really attractive.

3. INSTALL A CURVED SHOWER ROD: Apart from looking great, a curved shower rod also adds a lot of space to your bathroom. And it also attached to the wall with the help of screws, so you don’t have to worry about it being pulled down.

4. PLAN THE RIGHT HEIGHT FOR YOUR SINK: It is very important to place the sink at a proper height. Generally, it is placed 30 or 32 inches off the floor. Don’t make it too high, your kids will have difficulty then. If it is not properly placed, you will have trouble in washing your hands or brushing your teeth.

5. MANY OPTIONS TO DRY YOUR BATHROOM: It is very important to get rid of mold and mildew from your bathroom. Moisture is your bathroom’s greatest enemy. Removing the moisture is the first step. It is always better to have more than one options; a fan that vents to the outside and an operable window will do the trick.

6. LIGHTING: Many people underestimate the importance of lighting in a bathroom. However, lighting plays a huge part in deciding the overall attractiveness of your bathroom. For a comfortable and relaxing bath, dim lighting will be good. On the other hand, bright lights are essential during shaving or applying makeup. Hence, there should be versatile lighting options. Proper lighting can make a small bathroom look bigger.

7. CALL A PROFESSIONAL: Assess your DIY skills very carefully. In the long run, you can save a lot of money if you don’t have to call a professional to have something fixed up. If anything is out of your comfort zone, then don’t hesitate to call professional. An electrician may be needed to help with the lighting or a plumber may be needed for the drain lines.

8. SPLURGE ON SOME PRODUCTS: Since bathrooms usually occupy small spaces, splurging on some high-end products can be a good investment for the future. Investment in some expensive products like a high-end vanity top or a heated towel rack is not a bad idea.

References:
http://www.hgtv.com/design/topics/bathroom-makeovers